Normally all the houses and households have copper wiring running through the walls. Copper wiring over time is phasing out and is being replaced with the new era aluminum wiring. The reason being that the new aluminum type wires are being preferred is because the new wires are more conductive, which increases their efficiency to conduct electricity without much resistance. This, in turn, results in lower usage of electrical current which reduces the electricity bill over time. Moreover, since the wires conduct more and resist less, they also generate less heat, which eliminates the risk of fire hazard. So, how do we replace our existing copper wiring with the new aluminum one? The answer is simple, by hiring an electrician from Republic MO, an organization that will provide you with the best trained and the most recommended electricians. So, how electrician in Republic MO helps in Aluminium wiring upgrades:
1- Recommendation
The copper wires at your house will certainly be thicker than the aluminum wires which will replace them. When you opt for the aluminum wires, the thickness of the new wires reduces, because the aluminum wires are now more conductive. The issue is how much should be the reduction in the wire diameter as if the wire diameter is lesser than the minimum required then the wire will heat up, which may melt the insulation, which can result in short circuits. An electrician will check the overall load of the house and will recommend to you the most optimized wire diameter so that the wire can handle the house load and also at the same time is efficient in terms of money and conductivity.
2- Planning
The next phase of the wiring is the planning. Since the wiring is not a small process and that it requires some time, if the wiring is unplanned then it is certain that your house might have a power blackout for the next few days, depending upon how big your house is. The electrician will give you a plan as to when which section of the house will be rewired and will keep the other part of the house joined to the main panel through copper wires.
3- Wiring
The most important part is to take out the copper wires from the system and replace them with the new aluminum wires. Most of the houses these days have wiring which is inside the walls of the house. An electrician will come to your house and first take out the wires which were already installed, and then replace them with the new aluminum wire without damaging any pipeline which housed the existing copper wiring.
4- Testing
Safety is our foremost priority at Republic MO. So, once the wiring has been completed our electrician will do a safety check that the overall wiring is done as per the standards we have set to achieve. Also, to make sure that there is no rework to be done, our electrician will inspect the wires before replacing them with the new ones. In case there is any damage adequate and standard measures will be taken to mitigate any risk from damage that might occur in the future while the aluminum wires are used.
So, here are a few things that our electrician will do to help you with the Aluminium wire upgrade. Apart from the standard service, we offer utmost satisfaction to our customers through the best quality work and a workforce that is committed and dedicated towards the overall wellbeing of the customer and their demands.
